603,767 active members*
2,753 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2009
    Posts
    4

    Amada Turret-Problem

    Has anybody had an issue with the RAM Hold down function not working for forming tools on a amada turret? Trying to us a Mate tooling edge roller, keep getting a watchdog alarm for the press before it even tries to move the RAM down.

  2. #2
    Join Date
    Apr 2021
    Posts
    46

    Re: Amada Turret-Problem

    Watchdog alarm is a generic code for time ran out to perform a certain function. Is the Ram Hold Down" enabled on the M Code page? Also, you need to insert a M692 and M693 before
    the hit in the g code.

Similar Threads

  1. Amada Turret alignment
    By otrotabi in forum Bending- and Punching Machines
    Replies: 0
    Last Post: 01-19-2024, 03:00 PM
  2. Amada Turret alignment
    By otrotabi in forum Bending- and Punching Machines
    Replies: 0
    Last Post: 01-19-2024, 02:41 PM
  3. amada turret punch problem
    By bonesclarke in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 08-28-2019, 07:58 PM
  4. Amada Coma Turret
    By DHO.nl in forum Fanuc
    Replies: 3
    Last Post: 08-28-2019, 07:54 PM
  5. Amada VIPROS 558 Turret
    By Stupidav in forum Fanuc
    Replies: 2
    Last Post: 04-01-2011, 12:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •