603,370 active members*
3,871 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > changing belville washers

Thread: changing belville washers

Results 1 to 2 of 2
  1. 01-22-2008, 05:29 PM #1
    duphus
    duphus is offline Registered
    Join Date
    Jan 2008
    Posts
    1

    changing belville washers

    New here, so be easy!

    I did some searching and found a few posts on this, but I think the one I'm looking for is by nervis1 (refered in this post):

    http://www.cnczone.com/forums/showthread.php?t=25995

    I searched to find his older post and came up with nothing!

    My question is do you need the compressor tool and if so does anyone have the part number?

    I have it apart and that was pretty straight forward and pretty sure I understand everything else but I'm needing to order the spring kit and need to know if the compressor tool is needed or even available for my 2001 Fadal 20 x 50 with a 7500 chiller spindel.

    Thanks.
    Reply With Quote Reply With Quote
  2. 01-23-2008, 10:02 PM #2
    mekdad
    mekdad is offline Registered
    Join Date
    Dec 2007
    Posts
    32
    that part is called a bridge i think, i have not delt with 7500 rpm spindles but on my 10000 rpm yes you need it try fadalcnc.com they can get the parts and tool for you and price is good to
    you never know what you can do, until you have to undo something you have done!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Changing bellville washers...dangit!
    By carbidecraters in forum Fadal
    Replies: 0
    Last Post: 10-02-2007, 07:37 PM
  2. changing belville washers
    By Shizzlemah in forum Fadal
    Replies: 1
    Last Post: 10-19-2006, 04:48 PM
  3. RFQ: Aluminum Washers
    By kellogs72 in forum Employment Opportunity
    Replies: 4
    Last Post: 12-25-2005, 04:48 AM
  4. machining washers
    By MBG in forum MetalWork Discussion
    Replies: 6
    Last Post: 03-10-2005, 08:44 PM
  5. RFQ: Washers
    By kellogs72 in forum Employment Opportunity
    Replies: 4
    Last Post: 02-21-2005, 01:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules