Welcome to the new VS3D discussion forum !
I would like to thank CNCZONE for hosting it.

VS3D is a new Virtual Sculpting CAD/CAM software program developed by Designs Computed, LLC. VS3D has many applications including 3D carving, 3D engraving, 3-axis milling, relief surface sculpting, and image embossing - to name a few.

VS3D's functionality compares favorably to other "artistic" CAD/CAM packages, but at a much lower cost.

A general overview of VS3D is available at:
http://www.designscomputed.com/vs3d/overview/index.html

The home page for VS3D, including examples and tutorials, can be seen at:
http://www.designscomputed.com/vs3d/

The VS3D software can be downloaded from:
http://www.designscomputed.com/vs3d/download/index.html

The download contains the full product. All that is needed to fully enable it is a software key. Without a key, VS3D can be run in demo mode (file output disabled). A free 30-day evaluation key, or a permanent key, will unlock all the capabilities.

Please email me to request a 30-day or permanent key.

Thank you.