I work with a FPB1500, Anglemaster 823, Meba Saw, BDL.
I'm interested in getting some dialog going about different aspects of these machines.
Mark
Results 1 to 12 of 12
-
01-18-2007, 08:04 PM #1
Registered
- Join Date
- Jan 2007
- Posts
- 14
Anyone out there working on Peddinghaus Machines
-
02-05-2008, 10:48 AM #2
Registered
- Join Date
- Feb 2008
- Posts
- 8
what kind of bdl and meba are u using
-
02-14-2008, 03:57 PM #3
Registered
- Join Date
- Feb 2008
- Posts
- 8
Does anyone know if there is such a machine for punching and shearing channel iron?
-
02-14-2008, 04:04 PM #4
Registered
- Join Date
- Jan 2007
- Posts
- 14
We have used our Anglemaster 823B to punch holes in channel. We cut it on the saw later. Just thinking now... to speed up the cutting process you could put layout marks with the am at cutlines.
Originally Posted by dickdarby
-
02-14-2008, 04:14 PM #5
Registered
- Join Date
- Jul 2005
- Posts
- 100
The company I work for has one, I am in the detailing department though.
cadfish
http://www.burgiengineers.com/
-
02-14-2008, 04:24 PM #6
Registered
- Join Date
- Jan 2007
- Posts
- 14
Are you looking for info on this machine???
-
02-14-2008, 04:54 PM #7
Registered
- Join Date
- Feb 2008
- Posts
- 8
Thanks plasmaman but that is what we are doing at the moment. Originally Posted by Plasmaman
We drill and layout mark on TDK and then send to bandsaw.
What we are really looking is for a separate mc to do this whole process as we find it terribly slow drilling on TDK and cutting on bandsaw.
-
02-14-2008, 05:00 PM #8
Registered
- Join Date
- Jan 2007
- Posts
- 14
I have been tempted to try our FDB to do it, Hydraulic pressure way down.
Flanges facing down. I dont know if it would work or not.......
-
02-14-2008, 05:20 PM #9
Registered
- Join Date
- Feb 2008
- Posts
- 8
Yes, if at all possible Originally Posted by Plasmaman
-
02-14-2008, 05:22 PM #10
Registered
- Join Date
- Jan 2007
- Posts
- 14
Originally Posted by dickdarby
I was replying to another post from cadfish
-
02-15-2008, 01:39 AM #11
Registered
- Join Date
- Jul 2005
- Posts
- 100
No I dont need any details, I am the one who takes the engineer's drawings and draws every thing in more detail than just a line and what it is. Our Peddinghaus can drill, bend, and cut to length. We took off the torches and the fabricators do the end notches. Sorry for any confusion, I realized that I needed to go to work.
cadfish
http://www.burgiengineers.com/
-
03-26-2008, 12:07 PM #12
Registered
- Join Date
- Mar 2008
- Posts
- 1
Yes There is a CNC controlled Machine to Punch holes in Channel and Shear . If you would care to get in touch with me I know i can point you in the right direction.
Reply With Quote
Posting Permissions
