What settings in the machine dynamics should I have for a mazak vmc510c?
Thread: highfeed machining
Results 1 to 2 of 2
-
07-11-2008, 07:38 PM #1
Registered
- Join Date
- Jul 2008
- Posts
- 4
highfeed machining
-
07-11-2008, 07:56 PM #2
Registered
- Join Date
- Mar 2005
- Posts
- 215
You will need to run a test on your machine to see what it can do. Each machine will be different based on weight of the mass being moved(fixtures ect) and what options the machine has(high speed or not).
Go into your General Machine Parameters page in your machine definition and then go to the Machine Dynamics tab. On that page there is a button for Cornering Acceleration. Click on that button and it will open a little window with options. Press the ? for the Help. In there is a link for info on how to run a test that will determine what values you need to use.
HTH - Hope This Helps
ACAC
Has anyone seen my pillow?
Reply With QuoteSimilar Threads
-
MIS CNC Machining and tooling - General machining - Thermoform Molds
By modernprecision in forum Employment OpportunityReplies: 0Last Post: 11-24-2007, 05:05 AM -
CNC machining RFQ
By rubberdown in forum Employment OpportunityReplies: 14Last Post: 08-23-2007, 05:15 PM -
highfeed
By camtd in forum MastercamReplies: 0Last Post: 07-04-2007, 11:48 AM -
Machining anodized parts or anodize after machining?
By SRT Mike in forum MetalWork DiscussionReplies: 4Last Post: 03-12-2006, 06:22 AM -
machining O-1
By Bill in forum Hard / High Speed MachiningReplies: 6Last Post: 08-22-2003, 02:57 PM
Posting Permissions
