I need to change the servomotor break and to do that i need to take off the enconder.After that i need to calibrate the enconder and i would like to know how can i do that.
Cheers
Flopez
Results 1 to 2 of 2
-
08-14-2008, 07:26 PM #1
Registered
- Join Date
- Aug 2008
- Posts
- 1
servomotor siemens 1FK6 AC Three-phase
-
08-14-2008, 08:39 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24260
Is this an AC or BLDC motor?
If it is common Brushed type, you should not need to recalibrate.
OOps I just read the title, says 3 phase!
In many instances, the encoder is keyed to go on one way when AC sinusoidal.
Otherwise you could precisely mark the encoder and shaft.
The re-calibration by instrument would depend on the initial type of commutation.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
Servomotor
By Alex S.A in forum Servo Motors / DrivesReplies: 10Last Post: 06-10-2008, 12:50 PM -
Help with servomotor amps
By Ross77 in forum Servo Motors / DrivesReplies: 0Last Post: 11-08-2007, 10:08 PM -
Bosh servomotor
By quant in forum Servo Motors / DrivesReplies: 0Last Post: 06-07-2007, 11:30 AM -
SEM SERVOMOTOR Wanted
By joesimmers in forum Servo Motors / DrivesReplies: 0Last Post: 02-19-2007, 02:52 PM
Posting Permissions
