we have stepper motors(ht23-260-4) and we need to make it work with a mill machine but they are not strong enough to make it work . we need to know the best gearbox to work with these motors(calculations of the gearbox).please send us information in my email : [email protected]
Thread: need your help
Results 1 to 2 of 2
-
08-28-2008, 12:50 PM #1
Registered
- Join Date
- Jun 2006
- Posts
- 1
need your help
-
08-28-2008, 01:55 PM #2
Community Moderator
- Join Date
- Mar 2004
- Posts
- 1661
I suggest you to read the forum threads as here are numerous examples on the topic, try the DIY router subforum for example. No one uses gearboxes, they cause backlash. If your steppers must be geared down use belts.
This is an open forum, e-mail will not help the community. Either you will have answers here or not.
If you publish the data on the steppers it will be much easier.
Regards,
Sven
Reply With Quote
Posting Permissions
