does anyone have any canned cycle examples for a Hitachi-Seiki HT20SII with a Yasnac LXIII control? Please let me know. Thank You.
Brian Wentzel
Astro Machine Works
Thread: canned cycles
Results 1 to 4 of 4
-
02-10-2009, 11:01 PM #1
Registered
- Join Date
- Jan 2009
- Posts
- 3
canned cycles
-
02-11-2009, 01:29 PM #2
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
There is a Programming Manual you can download here for Free. It is in PDF but the pages are photo copied so the quality isn't the best.
Originally Posted by astro cnc
Yasnac LX3
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
-
02-13-2009, 09:47 PM #3
Registered
- Join Date
- Jan 2009
- Posts
- 3
Thanks I should be able to find what I need in one of these.
-
02-17-2009, 03:40 PM #4
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
YW. Hope the information helps.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Reply With Quote
Similar Threads
-
Meldas M0 no canned cycles
By rpmnh183 in forum Mazak, Mitsubishi, MazatrolReplies: 10Last Post: 06-19-2008, 11:58 AM -
canned cycles problem
By joachim in forum FanucReplies: 15Last Post: 04-01-2008, 06:01 AM -
canned cycles on 16t?
By DocHod in forum FanucReplies: 3Last Post: 07-09-2007, 01:58 AM -
G90/G91 in canned cycles
By alfalfa in forum CamSoft ProductsReplies: 18Last Post: 02-25-2007, 12:20 PM -
canned cycles on Haas
By GITRDUN in forum Haas MillsReplies: 3Last Post: 09-21-2006, 01:58 PM
Posting Permissions
