At first I would like to say hello to the cnczone community as this is my first thread.
I have a problem with a Gerber dimension 200x router (for signs manufacturing). The problem is that it doesnot load jobs from the computer. It seems like there is no comunication. The serial cable is ok as I tried a second cable and also if i disconnect the cable I take a message on the pc that the cable is disconnected. Also I tried a second instalation of the software but it didnt help.
The router worked fine but it stayed without job for a month and after that it doesnt work (it doesnt load jobs but it is possible to move the tool from the controller menu). I saw in the controller board that there is a non-volatille memory chip (I think DS1220) and as the machine is more than 10 years old I thought that it may lose the comunication parameters (serial comunication speed) due to low batery(on DS1220). So I would like to know if this machines have the ability to choose the comunication speed and if yes how is it possible to have access to the settings menu of the controller in order to fix it.
Thanks in advance for any help.