587,421 active members*
3,219 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > daewoo puma wont cancell ofsets

Thread: daewoo puma wont cancell ofsets

Results 1 to 3 of 3
  1. 12-27-2009, 04:52 AM #1
    harleydog
    harleydog is offline Registered
    Join Date
    Oct 2007
    Posts
    6

    daewoo puma wont cancell ofsets

    hi
    i have a daewoo puma 10 with fanuc 6t control
    it wont cancell ofsets...
    i use this format below

    gog50x5.z5. t202
    (can cycle moves here)
    g40x5.z5. to2o2

    it seems to retain offset value upon putting in next part an adds it..
    example .. u.01in offsets becomes 020 in next and on up..
    i am at my whits end !
    can this be mechanical?or defalts?
    old operator no longer here .. i am aneewbe
    thanks harleydog
    [email protected]
    Reply With Quote Reply With Quote
  2. 12-27-2009, 06:40 AM #2
    dcoupar
    dcoupar is offline Gold Member
    Send a message via AIM to dcoupar Send a message via MSN to dcoupar
    Join Date
    Mar 2003
    Posts
    2932
    I believe your cancel block should be

    G40 X5. Z5. T0200
    Reply With Quote Reply With Quote
  3. 12-29-2009, 08:51 PM #3
    bmngator
    bmngator is offline Registered
    Join Date
    Jul 2008
    Posts
    29
    I agree with dcoupar
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Daewoo Puma 6 with 3tf
    By mmxmb in forum Daewoo/Doosan
    Replies: 1
    Last Post: 04-06-2011, 01:36 PM
  2. Daewoo puma 8s
    By mroy0404 in forum Daewoo/Doosan
    Replies: 3
    Last Post: 06-14-2010, 07:58 AM
  3. Bar puller for Daewoo puma 8
    By jvanbysteren in forum Daewoo/Doosan
    Replies: 8
    Last Post: 06-01-2009, 05:54 AM
  4. I Need to buy a Daewoo Puma 8
    By gcrudgington in forum Daewoo/Doosan
    Replies: 2
    Last Post: 10-20-2008, 11:24 PM
  5. Daewoo Puma 200
    By williamsxu in forum Daewoo/Doosan
    Replies: 10
    Last Post: 01-17-2007, 11:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules