[Holzwurm56]

Hello ,
I am using a BP EZTRAK 2 CNC 3 Axis with software Version 4.00 Sn.: 8656E from 2000 . The machine was building in1998 . Is there a newer software available ? Is it possible to run the programm on a normally computer to create cam files at home ? Does someone knows a easy to use CadCam Program what creates camfiles for the Eztrak 2 ?

Many thanks for every answer

Hans

[colin1544]

Hello yes there is a version of software that can be run on a PC at home the version I have seen is a earlier one with just 2 axis but has the ability to input a Z move. I am also waiting for a copy of version 23 Bobcad cam which according to the rep has a post proccesor for the EZ-Trak, so when it arrives I will let you know unless someone else can already advise us if they have tried it and it works. Cheers Colin

[colin1544]

Hello Hans did you get any further with any offline software, if not let me have a PM of your home address and I will send you a copy of this early software, it will need a computer with DOS loaded and running. Please let me know if this is any use to you Cheers Colin
My Email is [email protected]