I am a couple of months into being a TL2 owner and am getting things set up and figured out. I have been reading the thread on tooling a turret (scary)which brings up my question. Has anybody mounted a Dorian manual turret on a TL2 that might be willing to share some pictures / advice? I picked up a S-NVIT8-100 Dorian set off of ebay for so cheap I couldn't pass it up. It uses 1" tools and seems a bit big for the TL2. At a minimum I will have to remove some of the splash guarding and make a base for it. It has a 2.5" center height and the turret is about 8.25" across the flats. I have a four position Dorian quadra toolpost that came with the machine which has so far met all of my needs, so I am open to any advice even if it is to put the turret back on Ebay.
Jon