I have a Partner 1 with a Centurion 6 control. On the bottom corner of the screen below rpm there is a part counter. Anyone know how to rezero it ? I'm sure it must be easy, but I just haven't found where to change it.
Thread: Part Counter Reset
Results 1 to 4 of 4
-
02-25-2010, 10:34 PM #1
Member
- Join Date
- Oct 2006
- Posts
- 19
Part Counter Reset
-
02-26-2010, 02:26 PM #2
Registered
- Join Date
- Dec 2009
- Posts
- 3
All you should have to do is press shift and at the same time press either F1, F2, or F3. One of the F keys resets it, one raises it by one and the other decreases it by one.
-
02-26-2010, 04:56 PM #3
Member
- Join Date
- Oct 2006
- Posts
- 19
Do you have to be in any particular screen to make this work ?
I does not seem to work from the main screen.
-
02-27-2010, 12:00 AM #4
Member
- Join Date
- Oct 2006
- Posts
- 19
I got it to work. Thank you very much for the help!!
Reply With QuoteSimilar Threads
-
Mastercam X2. Reset part origin.
By bob1112 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 02-19-2008, 12:54 AM -
turn on part counter in eia on MAZAK nexus vertical mill
By Denis13 in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 01-31-2008, 03:49 AM -
Reset Parts Counter
By martsto in forum MilltronicsReplies: 2Last Post: 09-18-2007, 04:59 PM -
Changing Fanuc part counter increment?
By gearsoup in forum FanucReplies: 4Last Post: 06-23-2007, 01:50 PM -
Part Counter
By ParadiseIsle in forum FlashCut CNCReplies: 1Last Post: 06-14-2007, 02:04 AM
Posting Permissions
