I run a wood workshop. specializes in using CNC machines. The cnc machine is currently using yaskawa's sigma 7 servo. The problem is that during the production process some servos are defective. I often use another model control board to operate it. But for some boards, the model doesn't match. But the code on the boards is exactly the same. I tried to change their model but couldn't. Is it possible to change their model and does anyone know? Please guide me. Thanks a lot.
Results 1 to 1 of 1
-
10-23-2023, 05:37 AM #1
- Join Date
- Oct 2023
- Posts
- 1
CHANGE MODEL SIGMA 7 YASKAWA SERVOPACK.
Reply With QuoteSimilar Threads
-
YASKAWA Sigma II/V servopack compatibility SGDM-30ADA-V
By MD21921 in forum Servo Motors / DrivesReplies: 0Last Post: 12-30-2022, 09:32 PM -
Having issue connecting with Yaskawa Servopack SGDA-08AS (servopack not found)
By CLIFFT in forum Servo Motors / DrivesReplies: 27Last Post: 08-03-2021, 11:53 PM -
Need advice on motion controller for Yaskawa Sigma (Sigma 1 so to speak) ServoPack
By bubba198 in forum Servo Motors / DrivesReplies: 4Last Post: 02-13-2017, 12:13 AM -
Yaskawa servopack
By NeubieCNC in forum Servo Motors / DrivesReplies: 3Last Post: 07-03-2016, 06:03 AM -
Change obsolete Yaskawa servopack to Panasonic
By viman149 in forum Servo Motors / DrivesReplies: 0Last Post: 10-21-2013, 05:28 PM
Tags for this Thread
Posting Permissions
