[puch666]

Hello!
I have lost my communication cable of my redsail laser engraver r3040a.

I have tried with a RS-232 standard cable but doesn't work. Also tried with a crossover RS-232.

So, i can use my machine

Someone who have this machine could help me tell me the pinout of this cable ?

I have been sending emails to Redsail but i got not responses.

Thanks

[Neil Pritchett]

Hi Puch666,
I will get one of the lads to check the pin-out for you.
Please send us a quick email via out web contact form so we have your contact details to send the info to.
This link will take you directly to our (CTRfuture's CTRlasers) contact page. http://ctrlasers.co.uk/tinc?key=WM3T...erFeedbackForm.
Best regards. Neil (for CTRfuture Ltd)

[pal_signs]

have buied 3 rs232 cables from media markt and they all work.
maybe you have another problem.

[puch666]

Hello!

I have solved my problem with the cable.

Here is the diagram (maybe there is another people with the same problem):


9pin(male)------------9pin(female)
2------------------------3
3------------------------2
7------------------------8
8------------------------7
5------------------------5

Thanks for your answers .

Cheers.