after making homing
this msg appear "rotate tool drum first"
any help
after making homing
this msg appear "rotate tool drum first"
any help
any one can help.
am trying to remove motor of magazine and it is not running may broken from 4 years , and the machine was working normally .
now i need to change parameter or diable tool magazine to delete this error ( Rotate tool drum first)
?????????????????????????????????????????
after making homing
this msg appear "rotate tool drum first"
any help
Do you expect anyone to diagnose an issue with your car, if you tell them "there's some noise under the hood, and a light on the dash" ?Fanuc is a Motion Controller, not an ATC controller. The MTB does that. It might help if people new what Year, Make and Model of machine you're talking about and what type of tool changer it has. Seriously... give only a little, and get back even less.
after making homing
this msg appear "rotate tool drum first"
any help
Be insulting... it's your loss
You need to sit back and look at what minimum info you need to give.... what one machine manufacturer with Fanuc control, more than likely, is going to be different to another maker.
But again... your loss
after making homing
this msg appear "rotate tool drum first"
any help
Please remain polite and follow netiquette. thanks
Community Manager <a href="https://de.industryarena.com/" target="_blank">https://de.industryarena.com/</a>