[CVALK]

I have an MG machine that accounts for a significant portion of my company's production. If the ACR8000 board was to fail it could cost us in excess of $30k / day having it down. We have had one fail before. For this reason it is imperative I find an ACR8000 backup board. The 8020 is not an upgrade option for us since it is incompatible with MG hardware. If I cannot find a backup board I will be forced to buy a new plasma. Any help would be greatly appreciated.

[Al_The_Man]

I have serviced a few MG machines and found often it was the encoder input IC's that failed, they are $3.00 IC's.
Is there any particular symptom?
Do you still have the old failed one?
Al.

[Al_The_Man]

There is also one on ebay item 360061223526.
Al.

[Aerobuilt]

Hi,

I have an ACR8000. I have not used it or test it but it comes with all manuals and software from the factory. I can give you more info if you need. I started out collecting hadware for a conversion, but it seems a little bit too in depth for me. I'm sure we can make a deal, baby arrived 1.5 years ago and I haven't done anything with it since. Let me know.

Thanks