Hello,
I have the machine Okuma OSP300M control ( it is 2R-NC ), Now I can not reading from PC to CNC by RS232.
Please support for me setting RS232.
Thanks.
Hello,
I have the machine Okuma OSP300M control ( it is 2R-NC ), Now I can not reading from PC to CNC by RS232.
Please support for me setting RS232.
Thanks.
hy, i have fancy osp300m digital manuals ... just say which one you need
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
Is your machine old or new?
i.e. is the controller a new generation P300 controller or an old OSP300 series?
LOTS of difference between these controls.
Hello,
it is OSP300M 1984 green screen ( Model 2R-NC ).
I need the parameter setting RS232 on the CNC machine.
I don't have the manual.
Please support for me.
Thanks.
kitty is not suposed to be a mr / sir ; "deadly" is more than enough
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg