[brahma608601]

Hi experts please help me, my cnc 1325 wood router was work well, but since yesterday had problem when the electricity power off with low voltage, next day we started the machine it moving wrong direction, not come to home position, Example when we press the x axis Positive Butten in the remote the machine moving negative direction the same happen too Z axis, and the y axis having two motor in that one motor moving positive other one moving negative so the axis try to twist not moving one direction, please help me.

Regards,
Balamurugan
Tamilnadu
India
00919894380233

[cncmakers001]

Hi experts please help me, my cnc 1325 wood router was work well, but since yesterday had problem when the electricity power off with low voltage, next day we started the machine it moving wrong direction, not come to home position, Example when we press the x axis Positive Butten in the remote the machine moving negative direction the same happen too Z axis, and the y axis having two motor in that one motor moving positive other one moving negative so the axis try to twist not moving one direction, please help me.

Regards,
Balamurugan
Tamilnadu
India
00919894380233

It seems the CNC parameters was lost due to the power failure.
Try to set the parameters right with back up.

[brahma608601]

thanks i will try to change it