587,201 active members*
2,745 visitors online*
Register for free
Login

Thread: r2c3 y-axis bearing source

Results 1 to 3 of 3
  1. 01-15-2009, 05:21 AM #1
    jamescrowe
    jamescrowe is offline Registered
    Join Date
    Jan 2009
    Posts
    5

    r2c3 y-axis bearing source

    i recently aquired a series 1 cnc r2c3 project as a conversion, the mill was partially dissasembled and i cannot find the y-axis ballscrew support bearing set pn#1-115-0271. they are available new but pretty expensive. i was curious if anyone on here knew of another source, or possibly a used set.
    thanks for your input
    james
    Reply With Quote Reply With Quote
  2. 01-15-2009, 10:10 PM #2
    gus
    gus is offline Registered
    Join Date
    Jan 2005
    Posts
    1121

    re

    They are a matched pair of IIRC angular contact bearings. They should be the same for all that vintage CNC machine. They will not come super cheap. If someone has their machine apart they can give you the bearing numbers, I do not think they are bridgeport specific
    Reply With Quote Reply With Quote
  3. 01-16-2009, 08:54 AM #3
    jamescrowe
    jamescrowe is offline Registered
    Join Date
    Jan 2009
    Posts
    5
    thanks gus, i was hoping someone might have or know of a parts mill, or had the bearing numbers, i wouldnt think they were bridgeport only
    james
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Bridgeport R2C3 manual
    By ps2727 in forum Bridgeport / Hardinge Mills
    Replies: 11
    Last Post: 07-04-2012, 12:21 AM
  2. r2c3 troublewith switch
    By Dar in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 08-24-2007, 10:09 PM
  3. New member, considering a R2C3 with a TNC 145 control Any help is appreciated
    By snafu350 in forum Bridgeport / Hardinge Mills
    Replies: 4
    Last Post: 08-19-2007, 03:46 AM
  4. V-Groove Bearing Source needed
    By widgitmaster in forum Linear and Rotary Motion
    Replies: 20
    Last Post: 03-31-2007, 05:42 PM
  5. Need a source for this bearing mount/assembly
    By SteveL in forum Linear and Rotary Motion
    Replies: 2
    Last Post: 09-18-2006, 01:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules