Is anyone here on CNC Zone using the new MACH 4 on their tormach.
I have been using the new Mach 4 on my tormach for a couple weeks and really like it.
I found transitioning from the Mach 3 very easy and started cutting parts almost immediately.
Is anyone here on CNC Zone using the new MACH 4 on their tormach.
I have been using the new Mach 4 on my tormach for a couple weeks and really like it.
I found transitioning from the Mach 3 very easy and started cutting parts almost immediately.
I am so glad to see your post ! I went from Mach3 tormach upgraded to the $800 pathpilot loaded computer which kept crashing and not booting up, Tormach gave me several "fixes"
which each only worked a little while ,but served to string things along till the one year warrenty ran out. Now for me ,its eitherbuy a new PP box or go with mach 3 or 4.
Where is the configuration file or whatever is needed to arrange mach 4 to work with tormach to be found ?
Hope you can help
Thanks
Dave Lawrence
The Pathpilot runs under LINUX and uses different interface hardware none of which works with MACH4. Moving from MACH3 to MACH4 is probably a lot more straight forward then moving from a LINUX based system