Filament type: PLA and ABS
• Filament size: 1.75mm
• Speed: 320mm/s
• Resolution: 100 steps/mm
• Repeatability: better than 30 microns
• Minimum layer thickness: 100 microns
• Build volume: 24inchesx24inchesx24inches
• Free training
• 2 color print head
• Filament holder
• 8mm stainless steel threaded rod
13mm guide rod
Electronics
• A4988 Motor driver
• RepRap Arduino Mega Pololu Shield
• Cura and or Slic3r (to prepare files for print)
• Nema 17 steppers 1.5A 2.8V 1.8 degree 200 steps per revolution
• Hotends, E3D (extruder nozzle) .4mm
• Thumb drive with DesignSpark Mechanical, firmware, Printer control software and
slicer
• Arduino mega 2560 R3 Control board
• USB cable
• ATX 500W power supply
• LCD Smart controller with SD card reader
• Machine delivered assembled, tested, calibrated, and ready to print.

Frame is CNC cut steel plate, 2.8mm sides, 5mm top and bottom.

Powder coated.

Stand is 1.6mm cold rolled steel CCN cut and powder coated.

https://www.facebook.com/pages/Large...71424443006175

Attachment 218462