[2_many_hobbies]

Does anyone know of a canadian distributor for ISO 30 holders? If not one up here how about some websites with prices listed. (Besides ENCO)

Thanks!

[Superman]

Can up with this search link, it has prices and a fair range of holders

[2_many_hobbies]

While it is a listing of ISO 30 holders and prices its not exactly what I was going for... Websites like that are wonderfully useless and they give you random prices and products from all over the place. And 10+ pages of >$200 holders is way overpriced.

R8 endmill holders are ~$65 for good quality ones, if ISO 30 really is that much more then im not going to bother with it.

[ihavenofish]

While it is a listing of ISO 30 holders and prices its not exactly what I was going for... Websites like that are wonderfully useless and they give you random prices and products from all over the place. And 10+ pages of >$200 holders is way overpriced.

R8 endmill holders are ~$65 for good quality ones, if ISO 30 really is that much more then im not going to bother with it.

http://www.maritool.com/Tool-Holders..._54/index.html

those are unfortunately the only "reasonable" cost holders ive found online.
BT30 are more common and economical.

[2_many_hobbies]

Thanks for Maritool, I have seen them before but they only have R16/32 collet holders but on the upside they are wonderfully concentric and balanced to 30,000rpm

[ninefinger]

http://www.shars.com/product_categor...let_Chuck_Sets

Thanks for Maritool, I have seen them before but they only have R16/32 collet holders but on the upside they are wonderfully concentric and balanced to 30,000rpm

Hi,

I just bought a set of NMTB 30 tool holders from SHARS.com and had it shipped to Canada. End mill holders are from $23US for 3/8" to $30 for a 1" holder or the set I bought was $160 for 7 sizes.

Also got an ER40 collet chuck and 7 collets for $92US, keyless drill chuck and and NMTB 30 arbour for it plus some other small stuff. Total was ~$365 us and shipping was $60 through USPS - they actually called and offered this so I didn't have to pay UPS my first born for brokerage fees!!

Products Product Code Quantity Total

1/32-1/2" J6 High Precision Keyless Drilling Chuck 202-5015 1 $23.95

NMTB 30 End Mill Holder Set 202-5608 1 $159.90

ER40 NMTB 30 Collet System 202-1376 1 $96.20

30 NMTB 6JT Taper Adapter 202-5724 1 $22.95

KBC tools is also in Canada but they were either expensive or didn't have what I wanted.

Mike

[mimillwright]

http://www.maritool.com/Tool-Holders..._54/index.html

those are unfortunately the only "reasonable" cost holders ive found online.
BT30 are more common and economical.

Wrong. I have found KBC Tool to be cheapest, and in stock.

[ihavenofish]

Wrong. I have found KBC Tool to be cheapest, and in stock.

kbc is one of the most brutally overpriced places to get tool holders i fond. they do carry a lot of stock, ill give you that but dont list a single iso-30 tool holder.

[mimillwright]

Does anyone know of a canadian distributor for ISO 30 holders? If not one up here how about some websites with prices listed. (Besides ENCO)

Thanks!

KBC Tools.I have been VERY satisfied with them. My item wasn't in stock, but they got it from another branch, within 48hours. And they were cheaper than anyone I could find. It seemed they wanted my business