We just got this machine. We can program w/ Mazatrol. We want to use our Mastercam. We have a good post. we can load a program with the cable we made. But we get an alarm code 839 illegal offset no. and also 228 illegal m code. We think it is a parameter issue using EIA. Does anybody have experience on what parameters to change. Thanx a million for any help.
Results 1 to 2 of 2
-
06-05-2009, 01:18 AM #1
Registered
- Join Date
- Nov 2007
- Posts
- 2
Problems using EIA with M32B control
-
06-05-2009, 03:29 AM #2
Registered
- Join Date
- Mar 2005
- Posts
- 988
Need more info here....
839 is an alarm relating to comp offsets (G41/42). For 228 you're either using a M code incorrectly/conflictingly/missing data or your machine may not have this M code. Can you post the code of give more details of the conditions?It's just a part..... cutter still goes round and round....
Reply With QuoteSimilar Threads
-
Fanuc 3000C control problems
By nlh in forum FanucReplies: 29Last Post: 11-27-2011, 12:23 PM -
Mitsubishi control multiple problems
By jdatbmc in forum Mazak, Mitsubishi, MazatrolReplies: 4Last Post: 05-29-2009, 02:38 AM -
Mitsubishi Control problems on a Citizen
By gearmachinist in forum Mazak, Mitsubishi, MazatrolReplies: 6Last Post: 01-23-2009, 07:06 PM -
Dnc on m32b?
By spock in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 03-15-2008, 03:30 PM -
Fanuc 5T Control Problems
By tech1 in forum FanucReplies: 0Last Post: 08-27-2005, 03:24 AM
Tags for this Thread
Posting Permissions
