whatever I write down in MDI mode (e.g. G0 X5.) it causes P130 alarm (2nd aux. addr.)
manual says I have to correct second misc. function in program or correct parameters, but I don't know what do they keep in mind?
Machine parameters
Base 2/4
#9 M2Name must be set
Thread: P130 alarm on 330M
Results 1 to 1 of 1
Hybrid View
-
04-29-2014, 04:09 PM #1
Member
- Join Date
- Aug 2007
- Posts
- 793
P130 alarm on 330M
Reply With QuoteSimilar Threads
-
(ALARM 414 SERVO ALARM) Y-AXIS DETECT ERROR?
By PICMAN in forum FanucReplies: 27Last Post: 02-09-2022, 05:10 PM -
Mitsubishi M-60V - Meldas 330M "M01" Error
By nlh in forum Mazak, Mitsubishi, MazatrolReplies: 26Last Post: 08-20-2019, 06:13 PM -
Daewoo DMV3016 Mill Alarm (Spindle tool clamp/unclamp alarm)
By nickhough in forum Daewoo/DoosanReplies: 4Last Post: 05-03-2019, 08:58 PM -
Fanuc Powermate D Alarm 414 (LV5V Control Power Low Alarm)
By james.e.raymond in forum FanucReplies: 6Last Post: 03-13-2013, 03:32 PM -
DAEWOO 8 Steady rest pressure alarm, External feed hold alarm
By doubleeagle in forum Daewoo/DoosanReplies: 4Last Post: 06-12-2009, 09:15 PM
Tags for this Thread
Posting Permissions
