[Hazza70]

Hello everyone. Ive got a Daewoo Puma with a Fanuc o-t controller. Ive bought a parting off tool with bar puller for my machine and I've run into a problem. When the bar puller parts off the part, then the spindle stops as per the program, the bar puller clamps the bar, opens the chuck on the M code, it then stops the program from continuing. It seems to be that there is no signal from the machine it's telling that the chuck is open. The proximity switches seem to work. Can anybody show me some light on this problem. Thanks in advance Harry

[machinehop5]

...most likely a parameter.....this is a quick answer with a Google search I found that might be the problem.
https://www.cnczone.com/forums/fanuc...alignment.html

Let us know,
DJ