587,575 active members*
3,755 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > SheetCam > Post Processor Files > mpfan post does not cut arc on fadal how 2 modify ijk

Thread: mpfan post does not cut arc on fadal how 2 modify ijk

Results 1 to 4 of 4
  1. 06-01-2012, 06:23 PM #1
    jb666
    jb666 is offline Registered
    Join Date
    Oct 2011
    Posts
    0

    Talking mpfan post does not cut arc on fadal how 2 modify ijk

    I need to no how to turn on my i j k so mpfan will post what i draw on mastercam 9 if anyone can help please let me no
    Reply With Quote Reply With Quote
  2. 06-01-2012, 08:18 PM #2
    txcncman
    txcncman is offline Gold Member
    Send a message via Yahoo to txcncman
    Join Date
    May 2004
    Posts
    4519
    I do not think you problem is in the post processor. You problem is probably in your machine definition. Change your machine definition from arc radius output to delta start to center.
    Reply With Quote Reply With Quote
  3. 06-04-2012, 02:10 PM #3
    jb666
    jb666 is offline Registered
    Join Date
    Oct 2011
    Posts
    0
    shouldent it have a g 41 in it it rns the path on mastercam perfect but not when i send it t the machine
    Reply With Quote Reply With Quote
  4. 06-04-2012, 05:55 PM #4
    txcncman
    txcncman is offline Gold Member
    Send a message via Yahoo to txcncman
    Join Date
    May 2004
    Posts
    4519
    G41 is tool cutter compensation. It does not directly have anything to do with I, J, K output for arcs. Which one do you want to talk about? I, J, K output or G41?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Will MPFan Post Processor good enough for my Sieg X2?
    By alexccmeister in forum Post Processors for MC
    Replies: 5
    Last Post: 05-20-2007, 12:55 PM
  2. MPFAN post in Pro NC?
    By wcssrobb in forum PTC Pro/Manufacture
    Replies: 0
    Last Post: 03-13-2007, 03:17 AM
  3. Rotary post issued, based on MPFAN
    By soundqsho in forum Post Processors for MC
    Replies: 2
    Last Post: 02-26-2007, 06:59 PM
  4. V9 MPFAN post mod.
    By COPO427 in forum Mastercam
    Replies: 10
    Last Post: 07-15-2005, 03:52 PM
  5. Modify Mastercam MPFAN post
    By COPO427 in forum Mastercam
    Replies: 15
    Last Post: 05-26-2004, 05:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules