A customer has asked me to investigate if NC programs can be uploaded to a Hurco from a usb drive connected to the COM port? I know that you can get an RS232 9-pin to USB cable but I don't know if that would work.
A customer has asked me to investigate if NC programs can be uploaded to a Hurco from a usb drive connected to the COM port? I know that you can get an RS232 9-pin to USB cable but I don't know if that would work.
In any case, you need a software that will read data from a USB drive and send to a controller.
AGG Software. DNC Precision and CNC Syntax Editor software.