[m98custom1212]

I have few parts, that I would like made. I designed for a project at Toledo University for a engineering class. I worked as a cnc programmer for two years so, the parts are machining friendly.

Parts are only 5.5 inch long and the major dia is .72. All dimensions are in inch.

Most tolerances are +-.005 I have couple tight tolerances +-.001 and couple +-.01

Stock would 1 inch dia Ertalyte TX. You would have to get that

You would need a cnc lathe with a milling head or set up parts to be turned then milled.

I will be coming back to you for more work.

I need 3 made

If you are interested on making these for me, send me a pm on here or email at [email protected]

I will pm you or email you the print

[Dualkit]

Been machining for 30 years and never heard of that material. I think you should
put up a better description of your part. It could be a screw machine part with that length to width ratio and needing such a machine would eliminate 95% of the people who bid work here, it would save you some time sending out prints to people who can't assist you.

[Runner4404spd]

we have turned ertalyte for other projects. the material is not cheap but we can get it. and we are located in sterling heights. i will email you for a print.

[mactec54]

Dualkit
This material is like a good replacement for Delrin AF, if you have ever used the AF you will know that that is a great material as well, but not used by many,

Ertalyte is a high strenth, high wear & good up to 200F deg a very nice material & can be machined any way you want

[m98custom1212]

Its a lathe part for sure. I have made one on mazak quickturn, toke way to long to get it my self. I have to study and million other projects im working on.

Yes good its a good replacement for derlin af. That was my orginal material but i found Ertalyte TX would be much better for my needs.

I will show you what part is

(green moving piece)




Sorry only sawing the print if you pm me or email

A certain paintball company is stealing design

[m98custom1212]

I did changed some stuff the final print will done asap

[CS900]

I've very disapointed you didn't contact me on PBN! you know i can make these for you...

[m98custom1212]

I did you never answered me

[dstryr]

Im a college student myself and own a CNC shop. Send me a email. I have a lathe with live tooling available.

dennisrathi[at]gmail.com

Creations Unlimited
Morgan Hill, CA 95037

[m98custom1212]

Im a college student myself and own a CNC shop. Send me a email. I have a lathe with live tooling available.

dennisrathi[at]gmail.com

Creations Unlimited
Morgan Hill, CA 95037

I will send you email

Update this parts only needs be turned out of 6061 AL

[dstryr]

Never got your email?

[lucystone]

I've very disapointed you didn't contact me on PBN! you know i can make these for you...


Best Attorney