When homing the machine I get "X-Axis Run-Away". However I can manually trip the limit swith before it reaches the trip on the machine and the machine will home out fine. The trip on the machine in activating the limit swith. We removed the bottom cover from the swith and used a multimter to make sure the switch is beign compressed enough by the machine trip.
Results 1 to 3 of 3
-
04-22-2010, 02:34 PM #1
Registered
- Join Date
- Aug 2005
- Posts
- 23
Bridgeport Explorer X-26 \ DX-32 Won't Home
-
04-23-2010, 03:35 AM #2
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
Is it homing at a normal speed?
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
04-23-2010, 01:16 PM #3
Registered
- Join Date
- Aug 2005
- Posts
- 23
Yes, I have not noticed it moving any faster or slower.
Reply With QuoteSimilar Threads
-
Minttea Need information on Bridgeport Explorer x-26
By minttea in forum Bridgeport / Hardinge MillsReplies: 5Last Post: 03-21-2010, 06:42 PM -
Bridgeport Explorer I Boss DX32
By minton in forum Bridgeport / Hardinge MillsReplies: 2Last Post: 02-13-2009, 06:12 AM -
Bridgeport DX-32 (Explorer I) / Conversion
By aogonzalez in forum Servo DrivesReplies: 2Last Post: 01-30-2009, 09:05 AM -
Bridgeport Explorer CNCs
By arsenix in forum Bridgeport / Hardinge MillsReplies: 9Last Post: 02-11-2005, 01:28 AM
Posting Permissions
