My machine..I think is a DWC-110H and has Offset registers that just won't behave for me. (not quite positive on the H of my machine)
I have played with them more and find that they will work as incremental shift registers rather than offset registers as below..
eg
G54 G90 G0 X0.0 Y0.0.
if my G54 is X10. y10, then my program will move x10 and y10. IF I reset the program, it moves another x10 y10....somewhat incrementally.
Is anyone using G54...or in my case G (chair) ! !
thanks in advance
Sean