[Mikey1719]

Our shop has a very early Ez-trak, probably 1st generation, CNC mill that is only 2 axis, LED readouts and the only interface outside of the machine is a RS232 connection. I have tried to connect using a standard parallel to usb adapter and Bobcad, but keep getting a "connection failed" error message. Could I be using the wrong cable or the wrong DNC settings? Anyone else had success connecting to this old machine, and sending or receiving code?

[Gncc50]

Try these guys, they at least can steer you in the right direction.


http://www.emi-inc.net/Manufacturer.aspx?mId=26



or these guys,



http://www.bptparts.com/



Pete

[machintek]

This is actually a control made by Southwestern Industries in California.
It has RS232 capability but not DNC. Check with them.
I have yet to have success with a USB to Rs232 adapter. I have heard of people having some success with a PCMCIA adapter to RS232.

George

[Mikey1719]

I have an older laptop with a parallel port. Do you think I could I use that, and would I need a null modem adapter in-line?

[machintek]

Parallel port is for a printer. This control needs a serial port.

George