Once again i'm back with yet another problem
my miller ,although slow is was getting the job done untill this afternoon when it stopped dead suddenly half way through a jopb,, no previous problems like this,
i found a fuse in the isolator ]in the main swich on the back of the switchgear had blown, ]
i but a piece of wire across it as i had no fuses and it powered up,
i then pressed CE to reference it, z referenced, then y, then z moved the tanble to the left as normal, ,i think at this point i jogged it forward a little and another fuse blew, on checking the fuses i found one inside the cabinet blown, it is one of the big ones along the top inside the cab, ,it is the left most ,
now i need to identify this fuse and what it supplies,so i can start trying to wotk out what is amiss,
so gents does anyone have any links to a wireing diagram so ic an get started,
any help will once again be greatly received,
regards carl