603,826 active members*
3,109 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2011
    Posts
    0

    Haas MiniMill Disassembly

    This might come as a completely oddball question, but I figured this would definitely be the place to ask.

    I'm trying to bring in a Haas minimill to our new shop, which is unfortunately half below grade. The only way to get it in is through an old industrial elevator, which of course it won't fit on the elevator and is much too heavy. The contractors said we could knock out the back wall of the elevator shaft and use a crane to drop it down in (A $4000+ endeavor, 1-2 days of work)

    Is it possible to disassemble the machine and put it back together. Even if it takes an entire day? Not sure if anyone has actually tried this before.

    Thank you!

    Alex Quaintance
    FrozenQPC

  2. #2
    Join Date
    Apr 2003
    Posts
    1873
    Whew, that's sounds like a real problem that only gets worse the further you have to dismantle.

    Just thinking out loud, now may be the time to spend some dollars in constructing a garage door or suitable entry/exit door for just this purpose, deliveries or additional equipment.

  3. #3
    Join Date
    Jul 2005
    Posts
    12177
    Quote Originally Posted by Frozen.Q View Post
    ......Is it possible to disassemble the machine and put it back together. Even if it takes an entire day?....
    Thank you!

    Alex Quaintance
    FrozenQPC
    Have you looked closely at a MiniMill? Theoretically it would be possible to remove the column casting from the bed casting/fabrication. The problems would be removing all the enclosure, then disconnecting all the wiring, etc., that snakes through the casting and taking off the electrical cabinet at the back and the control unit at the front. Reassembly would be equally complicated with the added problem of re-aligning the Z axis. I think this would be a many day operation and of course at the end you would have a questionable machine no longer under warranty.

    Knock the back wall out and use a crane.

    Alternatively look at digging a hole outside and knocking a hole through a wall???
    An open mind is a virtue...so long as all the common sense has not leaked out.

  4. #4
    Join Date
    Mar 2011
    Posts
    0
    Thank you both for your input. It does seem like the only viable option is to use a crane. The contractor said the cheapest way is to knock out the back wall behind the elevator and go down the shaft with a crane. Came in at a $5000 estimate.

    So, I might instead start with some bridgeport CNC mills instead. The operations I'll be doing are simple, and require few tooling changes, so something with an ATC is not completely necessary.

  5. #5
    Join Date
    Apr 2004
    Posts
    45
    There's the Tool room Mill

Similar Threads

  1. Software suggestions? Haas MiniMill
    By Tat2nu in forum Uncategorised CAM Discussion
    Replies: 4
    Last Post: 12-24-2010, 03:18 PM
  2. haas minimill
    By cordeirot in forum Haas Mills
    Replies: 5
    Last Post: 03-11-2010, 02:51 PM
  3. Haas minimill, what should I know...
    By Freddy Bastard in forum Haas Mills
    Replies: 14
    Last Post: 07-06-2009, 08:23 AM
  4. Post for Haas Minimill
    By Chubs in forum EdgeCam
    Replies: 1
    Last Post: 11-17-2006, 01:12 PM
  5. Haas minimill post?
    By mikeh78 in forum GibbsCAM
    Replies: 0
    Last Post: 04-21-2006, 05:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •