587,372 active members*
3,596 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > MX40HA stops at seq. 10, ATC.

Thread: MX40HA stops at seq. 10, ATC.

Results 1 to 2 of 2
  1. 09-10-2011, 12:07 AM #1
    Roy Clegg
    Roy Clegg is offline Registered
    Join Date
    May 2011
    Posts
    0

    MX40HA stops at seq. 10, ATC.

    We have rebuilt clamp cylinders, replaced prox. switches and swapped FUB cards. The mill still periodically stops at sequence 10 of a tool change?
    Reply With Quote Reply With Quote
  2. 09-10-2011, 12:59 AM #2
    Superman
    Superman is offline Flies Fast
    Join Date
    Dec 2008
    Posts
    3124
    Just went thru an issue on my old Co's MX

    Always check the messages on the "Diagnostics" page
    -if it us an unclamp LS signal
    -----problem is the limit switch adjustments on the back of the spindle
    ( these can be fiddly to set )
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Please Help! cut stops on ar 400 plate
    By GraemeAMH in forum Torchmate
    Replies: 0
    Last Post: 07-14-2011, 03:50 AM
  2. okuma mx40ha tool problem
    By cnc312 in forum Okuma
    Replies: 2
    Last Post: 01-21-2011, 05:00 AM
  3. M-Stops and starts
    By shane.vella in forum Machines running Mach Software
    Replies: 1
    Last Post: 09-25-2008, 07:48 PM
  4. I put Carriage stops / E-stops on the x&y Shoptask 1739 Gunmaster....I was bored lol
    By spunky1974 in forum Shopmaster/Shoptask
    Replies: 0
    Last Post: 06-30-2007, 10:13 PM
  5. Crusader just stops
    By harvard5 in forum DNC Problems and Solutions
    Replies: 2
    Last Post: 09-20-2005, 02:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules