I'm attaching a PDF of a small part 64055 that is ideal for laser process...approx 3/4 x 9/16 out of 300 ser stainless, .03 thick. I only need 100-200 pcs.
Thread: Need small laser cut part
Results 1 to 3 of 3
-
02-23-2012, 05:41 PM #1
Registered
- Join Date
- Jun 2007
- Posts
- 92
Need small laser cut part
-
03-02-2012, 06:53 PM #2
Registered
- Join Date
- May 2003
- Posts
- 323
RFQ
PM SENT
R K TECH MANUFACTURING LLC
[email protected]
-
03-06-2012, 04:51 PM #3
Registered
- Join Date
- Jun 2007
- Posts
- 92
(chair)Chris....thanks for the reply...I think.
You apparently submitted a quote but CNC.Com has the most baffling, user un-friendly and un-intuitive system and nobody intelligent enough to make it better (yes, I'm ranting). I've looked everywhere, clicked on every button and link but no quote sooooooooo send it directly to my email at [email protected]. I appreciate your response.
Reply With QuoteSimilar Threads
-
small run part
By xclr82xtc in forum RFQ (Request for Quote)Replies: 1Last Post: 03-15-2011, 03:34 AM -
Small part casting.
By Ark1 in forum Casting MetalsReplies: 3Last Post: 12-20-2010, 04:16 AM -
I need a very “small part” part catcher
By Vern Smith in forum Haas LathesReplies: 21Last Post: 08-25-2010, 01:55 AM -
Small RC Boat part on X4+
By john_t_h in forum Syil ProductsReplies: 4Last Post: 07-23-2008, 07:53 AM -
RFQ Small part
By impact in forum Employment OpportunityReplies: 2Last Post: 02-14-2005, 09:05 PM
Posting Permissions
