603,882 active members*
5,014 visitors online*
Register for free
Login

Thread: Identifying a printed attachment

Results 1 to 6 of 6
  1. 11-15-2005, 03:56 PM #1
    Rance
    Rance is offline Registered
    Join Date
    Jan 2005
    Posts
    302

    Identifying a printed attachment

    Moderators, etc.,

    I printed out an attachment for future reference and now want to go back and look at more of the thread that this came from but I don't know of a way to back reference it. Any ideas on how to do this without just asking the group who's pic this is? Thanks.

    Rance

    PS: The pic in question is: http://www.cnczone.com/forums/attach...chmentid=10339
    Reply With Quote Reply With Quote
  2. 11-15-2005, 04:49 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35494
    It's from Spalm, in the hardware store router thread in the Open Source Router forum. From memory, btw.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  3. 11-15-2005, 06:57 PM #3
    spalm
    spalm is offline Gold Member
    Join Date
    Feb 2005
    Posts
    578
    "I looked at those pics while trying to figure out a better way. I didn't care for the method you tried " Ger21

    Maybe this is not the most robost way to do this. I was just playing around.

    Steve
    Reply With Quote Reply With Quote
  4. 11-16-2005, 02:17 AM #4
    Rance
    Rance is offline Registered
    Join Date
    Jan 2005
    Posts
    302
    Quote Originally Posted by ger21
    It's from...the hardware store router / Open Source Router forum.
    Gerry, I searched all 9 pages and didn't find it. I could have missed though. :|
    Reply With Quote Reply With Quote
  5. 11-16-2005, 02:21 AM #5
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35494
    Post #209
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
  6. 11-16-2005, 12:56 PM #6
    Rance
    Rance is offline Registered
    Join Date
    Jan 2005
    Posts
    302
    I scroll too fast. (chair) Thanks Gerry.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules