I need to upgrade the video card in one of my computers and would like to spend my money wisely. I would like to get the most bang for a 100 dollar bill or somewhere close to that. I don't play any video games this is just my cad/cam computer in the shop.
Thanks
Gary :cheers:
Thread: Picking a Video Card?
Results 1 to 3 of 3
-
08-28-2006, 04:06 PM #1
Junior Member
- Join Date
- Jan 2006
- Posts
- 43
Picking a Video Card?
-
08-28-2006, 04:23 PM #2
Gold Member
- Join Date
- Apr 2005
- Posts
- 438
If your motherboard uses PCI for video you might look at the GForce 6600. Cheap and will get the job done. If it is AGP still have options, see the following link.
http://www.newegg.com/ProductSort/Ca...sp?Category=38 I like PNY stuff, never had a problem with them.
-
08-28-2006, 07:19 PM #3
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
Originally Posted by HPbyGD
My 2 Cents on Video Graphis Cards. Call your CAD/CAM supplier and ask them what cards they support. Not all are supported be everyone. Your supplier will give you the best matches for your application. Money well spent if you get the right one
:cheers:Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Reply With Quote
Posting Permissions
