[soy]

Hi

Please teach me a CNC plan using metric aluminum t-slot. For example Misumi's 4080(mm) or 3060(mm) etc.

As for the cut area size, I wish it is bigger than 450mm x 900mm.

The fla100-00 is an ideal plan. But it's a design of an inch size, so it is difficult
to buid it in metric.

It is very difficult for me to get 8020's 1530series t-slot.

[keebler303]

Use the same plan, substitute metric parts for inch parts. Seems straight forward.

Matt

[soy]

1530(inch)=38.1mm x 76.2mm

4080(mm)=40mm x 80mm

thanks, matt

Since the distance of a slot and a slot is different about 2 mm, it seems to be difficult to build straight.
Only a frame could be constructed.
However, I think that the various mount parts in which the screw hole is opened does not suit.
I am glad if 1530 and 4080 are the same sizes in fact.