We are looking at purchasing a couple of new machine tools.
Looking at NLX4000 Lathe & NHX 4000 Mill.
My question is does anyone have some feed back that they could give me on these machines.
Looking for good or bad just something.
We have Mori mills and lathes but nothing new.
Results 1 to 2 of 2
-
09-20-2013, 11:46 AM #1
Registered
- Join Date
- Mar 2012
- Posts
- 5
Looking for some feed back on NLX4000 Lathe & NHX4000 MILL
-
09-21-2013, 12:40 AM #2
Registered
- Join Date
- Sep 2013
- Posts
- 37
The new NLX4000 comes with Direct drive spindles for the live tooling. This adds to not only a higher torque, but reduces the thermal build up in the spindle. It also has coolant through the casting to reduce thermal deflection. NLX4000 comes with a 7.3" bore. Not always seen in this size machine. All NLX series comes with slide (box) ways.
NHX4000 has direct drive motor in the rotary table and has scales standard. 1,970 IPM rapids. This thing is fast and accurate!
Reply With QuoteSimilar Threads
-
4x4 Build Looking for some feed back
By BBamBam in forum Open Source CNC Machine DesignsReplies: 2Last Post: 11-25-2011, 06:07 PM -
Feed Back
By Farmers Machine in forum CamSoft ProductsReplies: 1Last Post: 10-20-2010, 01:59 AM -
Hurco 5M Need feed Back Please
By roadbyte in forum HURCOReplies: 0Last Post: 03-25-2007, 11:10 PM -
Lathe work feed back
By Kool Parts in forum RFQ FeedbackReplies: 0Last Post: 09-27-2006, 02:30 PM
Posting Permissions
