603,374 active members*
4,309 visitors online*
Register for free
Login

Thread: RFQ: Machining of Aluminum blocks 6x3x2.5" in TX

Results 1 to 2 of 2
  1. 11-01-2013, 05:03 PM #1
    X35 Design
    X35 Design is offline Registered
    Join Date
    Apr 2013
    Posts
    63

    Post RFQ: Machining of Aluminum blocks 6x3x2.5" in TX

    Hello-
    I have two items I would like machined. If you live between/near the area between Austin TX and OKC that would be ideal, but not absolutely necessary. I have rough cut material on hand, (about 6.5" long 2.5x3" aluminum stock) or you can provide.

    Please quote your price including materials if you are out of my area (see above)

    I can bring the materials if you are near, if so please just quote the machining costs.

    Please quote qty of 5/10/20 of each piece

    Any questions please PM and I'll answer quickly.
    Thanks
    Reply With Quote Reply With Quote
  2. 11-01-2013, 06:27 PM #2
    X35 Design
    X35 Design is offline Registered
    Join Date
    Apr 2013
    Posts
    63
    Note to add - a drill point at the bottom of the .740 or 1.360 holes is acceptable.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Projects Machining 1/4" Aluminum Plate
    By GrievousAngel in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 01-03-2013, 04:58 PM
  2. Nesting large blocks of code or "featuring" code blocks
    By earlywood in forum UG NX
    Replies: 17
    Last Post: 08-29-2012, 05:06 PM
  3. Looking for a Supplier for 5" and 6" squared gauge blocks.
    By Stampede in forum Calibration / Measurement
    Replies: 2
    Last Post: 07-24-2008, 10:16 AM
  4. Bought "NEW" rails & blocks on EBAY .... maybe not NEW
    By NC_jimbo in forum Linear and Rotary Motion
    Replies: 5
    Last Post: 04-25-2007, 07:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules