For a 6 Inch disk trying to machine, I can't for life life of me figure out why my machine and shaft is so long. How do I get it so I can just see the part and the end mill not the whole machine? I have to zoom and pan and it is a real pain. All the demos on line show a usable format, this view or settings I have suck and I cant get it to look like the demos.
Any ideas?
Thread: Sumulator Settings V26
Results 1 to 3 of 3
-
12-07-2013, 10:06 PM #1
Registered
- Join Date
- Mar 2011
- Posts
- 123
Sumulator Settings V26
-
12-07-2013, 10:09 PM #2
Ghost
- Join Date
- Dec 2008
- Posts
- 4548
press W on the keyboard.
-
12-07-2013, 10:25 PM #3
Registered
- Join Date
- Mar 2011
- Posts
- 123
All right it was the tool length I would change it and it would not save. I assumed it wold save. I had to go in and change each step and ave and exit out of the cad tree dialog and go back in and change the tool length individually instead of all at one time.
Reply With QuoteSimilar Threads
-
DSP settings
By rocabig in forum Excitech routersReplies: 7Last Post: 07-14-2016, 07:40 PM -
cv settings
By electric2u in forum Machines running Mach SoftwareReplies: 0Last Post: 01-27-2011, 03:19 AM -
Mach3 CV settings vs. G-100 Plugin CV settings
By Bfarn in forum Machines running Mach SoftwareReplies: 7Last Post: 12-17-2008, 05:45 PM -
Settings
By piedpipertraps in forum DynaTorchReplies: 7Last Post: 10-15-2008, 11:30 PM -
dnc settings
By jamesr in forum FanucReplies: 1Last Post: 02-02-2006, 09:13 PM
Posting Permissions
