[gizmo333]

Greetings,


What do you think about these drivers they are digital ?

Leadshine Technology Co., Ltd.

Do you think this is compatibile with these motors 57 two-phase 3A

Leading wires: 4 leading wire
Shaft diameter: 8mm
Shaft lenght: 25.5mm
Motor dimension: 57*57*76mm

Step Agle: 1.8+/-5%
Insultion Resistant : 500V DC 100MΩ Min
Insultion Strength: 50Hz 1Minute 500V Min
Ambient Temperature: -20~+50 degree
Temperature Rise: 80 Max.
Radial Play: 0.02mm Max.
End Play: 0.1-0.3mm
Current/phase: 3.0A
Voltage/phase: 3.6V
Inductance/phase: 2.3+/-20%mH
Resistance/phase: 1.1+/-10%ohm
Holding torque: 1.5 N. M



Regards

Rok

[neilw20]

Yes. OK. Set max current to 3A or less.
With DM870 you will get better top speed, as can be run at higher voltage.
M752 or M760 also a good choice.
I have used these drivers, and they are easy to use.