[yrian]

Hello i have probllems with my postprocessor. When I drill and thread, i would have the tool to go in the start position before it begins. Wher inn code wizard could i fix it?

T03 M06 (8.0 MM DIA X 90 POINT SPOT DRILL)
G54
S6366 M3
G0 X105.0 Y50.0 ok
G43 Z5.0 H03 M8
G81 G98 Z-3.4 R2.0 F1273.24
X90.0 Y24.019
X60.0
X45.0 Y50.0
X60.0 Y75.981
X90.0
G80
Z50.
G28 G91 Z0
M5 M9
N40 G21 G90 G40 G80 G94
T04 M06 (6.8 MM DIA JOBBER DRILL)
G54
S7490 M3
G0 x and y missing!!!
G43 Z5.0 H04 M8
G98 G83 Z-24.043 Q13.6 R2.0 F1497.929
X105.0 Y50.0
X90.0 Y24.019
X60.0
X45.0 Y50.0
X60.0 Y75.981
G80
Z50.
G28 G91 Z0
M5 M9

[jtreanor]

in the General Motion - Rapid After Toolchange constructor

if the X & Y values are "Modal" Edgecam only outputs the valus when they change

to override the modal setting - force output now

[DELETE][BLKNUM][RAPIDGCODE][<C>XMOVE][<C>YMOVE]