Re: Antek Power Supply Wiring?
Originally Posted by
groc426
Hoping for a little help with how to wire my Antek 70v 1500W power supply to my PMDX-134. There are two sets of capacitors. Antek's website states to wire these in parallel to allow full current (each capacitor set 11A?). I'm slightly confused because each set of capacitors has screw terminals labeled "++C--". I'm not sure what the C is and I'm not sure why there are two terminals for the live and neutral wires. I know this should be simple, but I don't want to mess this up. Here is how I believe it should be wired. Could anyone confirm this:
Groc426,
If you are connecting to J5 on the PMDX-134 your diagram is correct.
Jeff...
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.