[spratt]

Good Morning

Just started running sprutcam9 this morning and when I save a tap file I keep getting an error

Error interpretation
OUTTOOLLIST (13:0)
operator error

The tool paths look right put the error bothers me.
Any idea what me the operator error guy is doing wrong.

Thanks
Steve

[Bryan Turner]

Steve,

The word "operator" here is referring to internal parts of the computer program, not the machinist.

Without further information, it looks like you may have something wrong with one of your tool definitions. If you converted the tool database from a previous version, that would certainly be suspect.

A quick test; make a new project that cuts a simple hole, pick a tool and see if it generates the error. If you can get it to generate the error with just one tool, try deleting and re-entering that one tool from scratch.

Hope that helps.
--Bryan

[TurboStep]

Steve, check out this post:
http://www.cnczone.com/forums/sprutc...ml#post1590572
Step

[MichaelHenry]

The error message is apparently a bug in SprutCAM 9, but it can be ignored and the posted code seems to run just fine, at least in the fairly simple projects I've machined so far. Contact Jake at Tormach/SprutCAMAmerica and he should be able to send you a fix when it has been coded.

Mike