603,794 active members*
4,732 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > DIY CNC Router Table Machines > Cancelled due to loss of enthusiasm.

View Poll Results: Did you find this information usefull?

Voters
8. You may not vote on this poll
  • Yes I did!

    5 62.50%
  • No

    3 37.50%
Results 1 to 17 of 17
  1. #1

    Angry Cancelled due to loss of enthusiasm.

    Cancelled due to loss of enthusiasm.

  2. #2
    Join Date
    Jul 2005
    Posts
    668
    Good grief! 12 questions and 7 of them have 1 choice?
    Steve
    DO SOMETHING, EVEN IF IT'S WRONG!

  3. #3
    Quote Originally Posted by Madclicker View Post
    Good grief! 12 questions and 7 of them have 1 choice?
    Well, they are "Considerations" NOT choices, as stated in the title!

    For someone who contributes so little in their posts and comments, you are exceptionally critical of others!

    Please stay out of my posts or atleast keep your negative comments to yourself!

    Eric

  4. #4
    Join Date
    Jul 2005
    Posts
    668
    Well, let everyone post to this nonsensical poll and see what comes of it
    Steve
    DO SOMETHING, EVEN IF IT'S WRONG!

  5. #5
    Join Date
    Jul 2005
    Posts
    668
    I'M SORRY, but there is so much wrong information here...I don't even know where to start tonight.
    Steve
    DO SOMETHING, EVEN IF IT'S WRONG!

  6. #6
    start by saying something right !

  7. #7
    Join Date
    Dec 2004
    Posts
    1316
    This is a good list of considerations Eric, it answers a lot of questions newbies usually have as well more experienced users .

    Jason

  8. #8
    Join Date
    Oct 2006
    Posts
    259
    Thanks Jason.fficeffice" />>>
    Eric needed that « check » with reality !!!>>
    >>
    Some people !!!
    >>
    Robert M
    >>

  9. #9
    Join Date
    Dec 2004
    Posts
    1316
    Eric,

    Keep the list going as there will always be "others" who try to crush your spirit for helping others.

    Jason

  10. #10
    Join Date
    Oct 2006
    Posts
    259
    Doops !!!

    All my apologies to you Eric...
    Earlier my comment was adrresing to Steve for is lack of comprehension (wedge) !!!
    As Jason says, keep this list going... I too will learn out of it !!!
    Heck, maybe others too ??

    Sincerly, Robret

  11. #11
    Eric are you sure this pole should be pulled , there was a lot of good information for the new guys ,questions that are quite commonly ask on a daily basis , a lot of these polls take time to get rolling
    your polls are normally designed to stir the pot and see what info comes from it ,which is good not everyone agrees on the same thing

    its shamefull to see the poll get started by a know it all know nothing jackass who constantly contributes his ignorant opinion with absolutely nothing to back it

  12. #12
    Join Date
    Sep 2006
    Posts
    881
    what the heck is this thread??? theres not any information to find usefull or not.. im so confused... i must have missed something...
    Grizzly X3, CNC Fusion Ballscrew kit, 3 500oz-in bipolar steppers, 3 203v Gecko's, Linear power supply from Hubbard CNC, Mach 3, BOBcad Pro Art V22, Rhino.

  13. #13
    Join Date
    Dec 2004
    Posts
    1316
    Dertsap,

    I am a bit confused by post #11, you seem to credit the poll and then discredit in the last line of your post.

    Jason

  14. #14
    Join Date
    Oct 2006
    Posts
    259
    Jason
    I’m not going to speak for Destrap but if I may… I would assume by reading his post he was addressing to MadClicker (Steve) who his mad about anything ??

    TO ERIC
    Hate to agree with dertsap but you should consider putting it back… it is ( was) good poll !!!

    Robert M

  15. #15
    i was refering to the first replys to widgitmasters poll post #2,4 and 5,

    by far not in reguards to the widgetmaster or his poll,anyone reading his posts understands he is quite knowledgable and contributes a lot here


    maybe the poll can be restarted under a new thread and this one respectfull wiped out

    and hopefully some people will learn to show some respect for once in their life

  16. #16
    Join Date
    Dec 2004
    Posts
    1316
    I agree totally, nothing is achieved in being rude to such a positive contributer to the zone.

    Eric,
    Lets shake off those negative comments and start again.

    Jason

  17. #17
    Join Date
    Aug 2003
    Posts
    454
    I cannot say whether I found the information useful or not because it isn't there anymore. Please re-instate. With such a large number of members, there are bound to be one or two who, for whatever reason, find fault with just about everything. Eric, please don't judge the rest of us by this very, very small minority. I for one, thoroughly enjoy reading your posts and I am sure the vast majority can learn something from you or, if not, just sit back in awe and wish we could achieve half of what you do.

    Mike F

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •