[Grimreaper831]

Attachment 291788

Please any advice on the picture I have attached. The laser seems to be cutting a wavy line along the text.

Thank you in advance.

[Stigoe]

You didn't say anything about what kind of laser or what kind of drive train you have, but if you have V-wheels, check that you don't have any flat spots on your wheels or dirt on the extrusions where the wheels travel.

[Grimreaper831]

I have a 60watt laser engraver. G.Weike make model LC6090. No idea what a drive train is, sorry. I'm REALLY new at this. Thanks for your help, really appreciate it. Amanda.

[Stigoe]

Drive train = what drives your axes. Do your laser have V-wheels, as in do they have a v-slot where your normal car tires have the threads, or does it use linear rails? Looking at G.Weike websitem, it looks like it uses linear rails. Then you shouldn't have any problems with flat spots on V-wheels.So I don't really know what the problem is... Sorry.

[fixtureman1]

Are your belts tight with the power off does the head move easily