[X35 Design]

Hello-
I'd like a quote for the the following washers:
20 of each size
40 of each size
80 of each size


Material is Rigid HDPE 3/16"
Large washer is 2.88 OD x 1.36 ID
Small washer is 2.00 OD x 1.10 ID
OD are +/- .050"
ID are +0.05"/-0.00"
Break all edges

PM or email, either is fine
steve@x35design

Drawing is attached below

I am located in Texas Zip 76310

Thank you.

[slwong18]

Hi there,

We are interested to provide quotation. Is this possible to provide the 3D and 2D drawing to us? We can be contacted through this email [email protected]

BR
/SL Wong
Sales Manager
Proto Tree LLC
Website: Proto Tree
Email: [email protected]

[jeffrey001]

Hi there,

We are interested to provide quotation. Is this possible to provide the 3D and 2D drawing to us? We can be contacted through this email [email protected]

BR
/SL Wong
Sales Manager
Proto Tree LLC
Website: Proto Tree
Email: [email protected]

Me too, I could not machine these washers without a 3D file:bs:

Jeff

[azmachining]

Hilarious!!!! ANY machinist worth their salt could make these parts without a drawing.

[X35 Design]

I'll choose the vendor on Monday the 14th. Thanks to all who sent quotes in.

[Dualkit]

Hilarious!!!! ANY machinist worth their salt could make these parts without a drawing.

Just a poser middle man using Chinese machine shops who rents an office in the USA. Probably wouldn't even know how to turn on a drill press.

[MeanGreen94Z]

still open? i know its a lot late but i could pump these out for a good price.

EDIT, sorry i cant read apparently. if you come into needing these again please contact me.