[jtiny]

I'm looking at getting my first laser cnc machine.

I am completely new to this and have know idea were to start. I want a machine that will I upgrade as my skills and work load increases. I would like to be able to cut everything from paper to metal.

I have been doing some research and am overwhelmed by everything out there. I have a shop to put the machine but don't want to spend thousands of dollars to get started I know it's going to cost some amount to get started.

I'm new to cnc also but have some clients wanting cut out pieces added to the metal work I do for them so instead of relying on others I would like to do it myself.

Sent from my Pixel using Tapatalk

[laserliu]

HI Jtiny,

dear if you cut paper to metals then i rtecommend you one machine our LF1325LC with two head , fiber laser head and co2 laser head one mahicne with two heads ,

this can save you muc money to buy two machines.
see its videos below;
LF1325LC
G weike LF1325LC Metal Non Metal Fiber Laser Cutting Machine Mixed with CO2
https://www.youtube.com/watch?v=QDQ-uOtXGu0

and here is its photos :



can you tell me for steel you cut how thick ?

ok for more news you can contact me :

Quiven from gweike laser chloe@wklasercom
Mob / Whatsapp: 86-15698041856 Skype: wkquiven Wechat/QQ:1091701353

I'm looking at getting my first laser cnc machine.

I am completely new to this and have know idea were to start. I want a machine that will I upgrade as my skills and work load increases. I would like to be able to cut everything from paper to metal.

I have been doing some research and am overwhelmed by everything out there. I have a shop to put the machine but don't want to spend thousands of dollars to get started I know it's going to cost some amount to get started.

I'm new to cnc also but have some clients wanting cut out pieces added to the metal work I do for them so instead of relying on others I would like to do it myself.

Sent from my Pixel using Tapatalk